Maintenance and Care Strategies for Your Smok Pen Starter Kit
The Smok Pen is really a new type of pen which allows you to write on paper that is heated before you write. It’s the sort of device that some students wish to have, as it eliminates the need for them to carry a whole tube of special writing ink. You merely fill the reservoir with the normal ink and place your pen in the unit and then write on any smooth surface that you would like.
The Smok pen consists of two major components: the pen body, that is of course where you hold it in place, and the Smok Valve which serve because the connector for the USB charging port. Both parts are encased in a metal and plastic tube known as the Smok Valve, that is opened with a valve control found at underneath of the pen. One end of the tube results in the cigarette lighter socket as the other results in the USB charging port. On the front side of the Smok Valve there exists a dome with a lip that holds the heating element.
When the pen is charged, it is heated up by the USB power port and begins to generate heat. This heat melts the glue which holds the Smok Valve together, causing it to expand until it leaks out onto the paper or whatever you are writing on. After the ink is successfully charged, the Smok Valve automatically closes, leaving you with a completely functional pen. The surface of the pen has a transparent dome with a lip around it. Both edges of the dome have a metallic texture to them, which when heated causes the ink to spread into a fine powder that may easily be sucked in to the writing medium.
When you first take out your Smok Pen, you will observe that it looks exactly like any other pen. It includes a fine point that won’t smudge or bleed if you are writing on paper. In addition, it has a beautiful metallic shine to it, gives the device a futuristic look. However, this does not mean that the device cannot be used in an ordinary manner, as there are a number of different ways where you can still benefit from the great features of the pen.
A proven way is to heat the unit using your hand, that is how most people enjoy their pens. If you are using the device in this manner, you need to make certain you do not touch the heating coil heads directly. Instead, you should warm the entire pen to create out their warmth. It is important to remove the battery ahead of this task, as some manufacturers specify a certain temperature to activate the coil heads. There are many different e-liquids in the marketplace that can help you accomplish that heat change quickly and easily, ensuring that you never come across issues while warming the pen.
You may find that after heating up the device that it does not work correctly. This normally implies that you are either holding the pen incorrectly, are pressing the heating coil too hard, or are holding the device at a position that is not conducive to warming. If this is actually the case, then you should take away the batteries and put the device back together again. It is strongly Vape Pen Battery recommended that you do this each and every time you start enjoying your Smok Pen starter kit – if you wish to keep the device for longer than this then you can certainly simply repeat the process and soon you have everything sorted.
When testing your starter kit to make certain everything is working correctly, you will have to check out the connections to the tank and the coil head. Ideally, the connections on the tank ought to be securely tightened – if they are loose then they ought to be tightened to the manufacturer’s specifications. If you feel that this has not been done correctly, then it may be worthwhile getting the entire tank re-tightened by way of a professional as much devices like these are manufactured to an extremely high standard. If this isn’t the case, then your only way to ensure that everything is working properly would be to have the entire tank re-tied.
The next step in the battery care process would be to charge your show pen. This may usually be done through the USB port of one’s computer. Once charged, these devices ought to be ready for use. When you have completed this step, you should leave the device connected to a power supply. You should check regularly that the coils are charged up, and then you should leave the device to charge for the recommended time frame – typically around 5 hours.